Error replies – 2N M2M Solution 2N SmartCom - User Manual 1.9.0 User Manual

Page 64

ADD= – add a selected IP address to the list end.

Caution

Enter the IP address in the numerical format only ranging from
0.0.0.0 to 255.255.255.255.

DEL= – delete the IP address on the selected list position.

Caution

Select in the ip_id parameter to delete all the IP addresses from the

list. The SMS will be as follows:

SC IPA PWD=password DEL=0

REP=, ,… – replace the existing
address list with a new one.

Example:

Suppose you want to know whether the IP access function is enabled. Send the
following SMS:

SC IPA PWD=

The reply can, for example, look as follows:

AUTH=1 1:90.156.29.195 2:109.54.2.234

Now disable the IP access and delete all IP addresses from the list using the following
SMS:

SC IPA PWD= AUTHpassword=0 DEL=0

The following reply will come from the terminal:

AUTH=0 NO IP

Tip

NO IP means that there is no IP address in the address list.

Error Replies

Having noticed an error in the configuration SMS or command processing, 2N

will send you an error reply.

SmartCOM

If the terminal generated an error reply,

it means that the command was not executed!

Tip

2N SmartCOM

sends error replies until all the configuration SMS

parameters are OK and the command is executed.