2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 116)

116
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Enter the command to return the list of all SC Server terminals.
at^scterminal="add","","","" ,""]
Enter the command to add a terminal to the database.
at^scterminal="edit",,"","",""[,""]
Enter the command to edit a terminal with the selected Terminal ID. Always
enter all parameters.
at^scterminal="remove",
Enter the command to delete a terminal with the selected Terminal ID.
URC
URC (Unsolicited Result Codes) notifies state changes of the following objects: users,
terminals and connections.
at^scind?
Enter the command to write out to which URC the user is logged in.
at^scind="",
Enter the command to log in/out the user to/from URC.
<type> select the URC type (user / terminal / connection / all)
<value> 0 = disabled / 1 = enabled
Note
To log in to the terminal URC, enter the following command into AT
API: at^scind="terminal",1
URC format
user connection state change (like in response to at^scuser?): ^SCUSER:
, "", "", "", "",
""
terminal connection state change (like in response to at^scterminal?):
^SCTERMINAL:
, "", "",
"", ""
connection
state change at terminal port: ^SCLINK: ,
"", "", "", "",
""