2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 122)

122
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Enter SMS to send the defined SMS to the defined telephone number.
Note
A typical SMS sending AT command looks as follows:
At^scudf="add","AIN1>50:SMS p[+420123456789] m[text 1]"
Caution
Make sure that the telephone number and message parameters are
completed to set this function successfully.
TCP
Enter TCP to send the defined TCP message to the defined IP address and port.
Use telnet for TCP sending.
Note
A typical TCP sending AT command looks as follows:
At^scudf="add","AIN1>50:TCP i[62.134.22.87:8026] m[text 1]"
Caution
Make sure that the telephone number and message parameters are
completed to set this function successfully.
Warning
Make sure that the TCP receiving server exists to avoid process
slow–down due to the terminal waiting for the reply from a
non–existent server and not executing new actions.
CNT 1-5
Enter CNT 1-5 to control all of the 5 internal counters.
Note
The AT command for counter increment by 1 can be as follows, for
example:
At^scudf="add","AIN1>50:CNT1 d[1]"