JLG 4017RS Service Manual - Manual (Page 187)

9-35 3614RS, 4017RS
Electrical System
9.13 MACHINE FAULT CODES
9.13.1 Help Comment (00X)
9.13.2 Power Up (21X)
Message
Fault
Code
Indicators Other Actions Taken Trigger for Fault Latch Until
EVERYTHING OK 001
The system detects no problems
exist.
Message
Fault
Code
Indicators Other Actions Taken Trigger for Fault Latch Until
POWER CYCLE 211 - - Power was cycled ON. -
JOYSTICK AXES NOT
IN NEUTRAL POSITION
AT POWER UP
215 5000Ms
The cabin joystick X & Y axis input
shall be ignored
The cabin joystick’s X or Y axis is not
neutral at power-up
The cabin
joystick’s X and
Y axis return to
neutral
JOYSTICK BUTTON 5
ACTIVE AT POWER UP
217 5000Ms
The cabin joystick S1 push button
(downshift) is prevented
The cabin joystick’s S1 push button
(downshift) is pressed at power-up
Machine Setup’s TRANS SELECT set
to JOYSTICK, then log a fault.
The push
button is
released
JOYSTICK BUTTON 4
ACTIVE AT POWER UP
218 5000Ms
The cabin joystick S2 push button
(upshift) is prevented
The cabin joystick’s S2 push button
(upshift) is pressed at power-up
Machine Setup’s TRANS SELECT set
to JOYSTICK, then log a fault.
The push
button is
released
FRAME LEVEL RIGHT
INPUT – INVALID
SIGNAL
2119 5000Ms
Frame Level Left & Right are
prevented
UGM J4-30 Frame Leveling Right
Switch is closed at power-up
Power cycled
FRAME LEVEL LEFT
INPUT – INVALID
SIGNAL
2120 5000Ms
Frame Level Left & Right are
prevented
UGM J4-9 Frame Leveling Left
Switch is closed at power-up
Power cycled
CONTINUOUS
AUXILIARY
HYDRAULICS SWITCH
HIGH AT POWER UP
2122 5000Ms
Continuous Auxiliary Hydraulics are
prevented
The cabin joystick’s S switch is closed
at power-up
Only if Aux configured
The switch is
open
momentarily
(1,000Ms)
JOYSTICK TRIGGER
SWITCH ACTIVE AT
POWER UP
2123 5000Ms
The cabin joystick trigger is
prevented – Stabilizers
The cabin joystick’s trigger is
pressed at power-up
The push
button is
released
(150Ms)
JOYSTICK LEFT
ROLLER NOT IN THE
NEUTRAL POSITION
AT POWER UP
2124 5000Ms
The ARF roller is prevented (Fork Tilt
or Telescope)
The cabin joystick’s left roller (ARF) is
not neutral at power-up
The roller
returns to
neutral
(150Ms)
JOYSTICK RIGHT
ROLLER NOT IN THE
NEUTRAL POSITION
AT POWER UP
2125 5000Ms
The ARR roller is prevented –
Auxiliary Hydraulics
The cabin joystick’s right roller (ARR)
is not neutral at power-up
Only if Aux configured
The roller
returns to
neutral
(150Ms)