JLG X23J Operator Manual - Manual (Page 29)

25
Only use dry detergents, in accordance with the manufacturer’s instructions. Never remove
covers, guards and the like.
‑ Clean the electrical system using a dry, non‑metallic brush and low pressure air.
• After cleaning
Dry the machine carefully before starting it again (for example using compressed air).
If, despite all the precautions, moisture has penetrated into the electric motor or other parts
of the electric system, these must be dried using compressed air to avoid the risk of short‑cir‑
cuits.
Prevention of damage caused by the working machine
When the machine is stabilised and work started, do not enter its radius of action.
Systematically manoeuvre the controls slowly and regularly, do not reverse movements
abruptly.
During work operations outside of the basket, ALWAYS remain at a MINIMUM DISTANCE
OF 1 METER from the machine.
BOOM LIFT MODELS X23J
JLG
X23JR0620113
IMPORTANTE
ATTENZIONE
IMPORTANT
ATTENTION