JLG G5-18A Service Manual - Manual (Page 57)

4-9 G5-18A, 2505H, 25.5
Cab
4.4.10 Air Filter System (If Equipped)
1. Park machine on a hard, level surface.
2. Fully retract boom, lower boom, place transmission
control lever in (N) NEUTRAL.
3. Engage park brake and shut engine OFF.
4. Place a Do Not Operate Tag on both ignition key
switch and steering wheel.
5. Properly disconnect battery.
6. Open engine cover. Allow system fluids to cool.
7. Remove access panel (1).
8. Remove cab air filter (2) and inspect. If required,
replace with new filter.
9. Place filter back under seat and secure.
10. Replace and secure access panel.
11. Properly connect battery.
12. Close and secure engine cover.
13. Remove a Do Not Operate Tag on both ignition key
switch and steering wheel.
MY9020
2 1