JLG 1850SJ Service Manual - Manual (Page 296)

SECTION 6 - JLG CONTROL SYSTEM
6-14 – JLG Lift – 3121619
6.2 MACHINE PERSONALITY SETTINGS AND
FUNCTION SPEEDS NOTE: Personality settings can be adjusted within the adjustment
range in order to achieve optimum machine performance.
Table 6-4. Machine Personality Settings and Function Speeds
SUBMENU
(DISPLAYED ON
ANALYZER 1ST LINE)
PARAMETER
(DISPLAYED ON ANALYZER 2 ND
LINE)
DESCRIPTION RANGE
DEFAULT
VALUES
TIME RANGE
(SEC)
DRIVE: ACCEL X.Xs Displays/adjusts drive acceleration 0.1 to 5.0 sec 2
DECEL X.Xs Displays/adjusts drive deceleration 0.1 to 3.0 sec 1.3
MIN forward XX% Displays/adjusts minimum forward drive speed 0 to 35% 1
MAX forward XXX% Displays/adjusts maximum forward drive speed 0 to 100% 100 54-58 (see orientation)
MIN reverse XX% Displays/adjusts minimum reverse drive speed 0 to 35% 1
MAX reverse XXX% Displays/adjusts maximum reverse drive speed 0 to 100% 100 54-58 (see orientation)
ELEV. MAX XX% Displays/adjusts maximum drive speed
NOTE: used when elevation cutout switches are
limiting maximum speed
0 to 50% 25 110-112 (see orientation)
CREEP MAX XX% Displays/adjusts maximum drive speed
NOTE: used when creep switch on pump pot is
active
0 to 50% 35 79-87 (see orientation)
STEER: MAX SPEED XXX% Displays/adjusts maximum steer speed. 0 to 100% 100
MAIN LIFT: ACCEL X.Xs Displays/adjusts main lift acceleration 0.1 to 5.0 sec 1
DECEL X.Xs Displays/adjusts main lift deceleration 0.1 to 3.0 sec 1
MIN UP XX% Displays/adjusts minimum main lift up speed 0 to 60% 20
MAX UP XX% Displays/adjusts maximum main lift up speed 0 to 100% 80 75-100 (see orientation)
CREEP UP XX% Displays/adjusts maximum main lift up speed
NOTE: used when creep switch on pump pot is
active 0 to 65% 50
MIN DOWN XX% Displays/adjusts minimum main lift down
speed 0 to 60% 10
MAX DOWN XXX% Displays/adjusts maximum main lift down
speed 0 to 100% 60 85-110 (see orientation)
CREEP DOWN XX% Displays/adjusts maximum main lift down
speed 0 to 75% 45