Eppendorf Biological Shakers Innova 44R - Manual (Page 9)

9
Biological Shakers Innova® 44/44R — Operating manual
2.5.1 Personal injury and damage to device
WARNING!
Electric shock due to damage to the device or power cable
 Only switch on the device if the device and power cable are undamaged.
 Only use devices that have been properly installed or repaired.
WARNING!
Lethal voltages inside of the device
 Ensure that the housing is always closed and undamaged so the user cannot accidentally
touch the parts inside.
 Do not remove the housing of the device.
WARNING!
Danger due to incorrect power supply
 Only connect the device to voltage sources that meet the requirements on the name plate.
 Only use sockets with a protective earth (PE) conductor and suitable power cable.
WARNING!
Health risk due to contact with infectious liquids and pathogenic bacteria
 Observe the national regulations for handling these substances, the biological security level
of your laboratory, the material safety data sheets and the manufacturer's application notes.
 Wear personal protective equipment (PPE).
 Follow the instructions regarding hygiene, cleaning and decontamination.
 For complete instructions on the handling of germs or biological material in risk group II or
higher, please refer to the "Laboratory Biosafety Manual" (source: World Health
Organization).
WARNING!
Health risk due to poisonous, radioactive or aggressive chemicals
 Observe the national regulations for handling these substances as well as the material safety
data sheets and manufacturer's application notes.
 Wear personal protective equipment (PPE).
WARNING!
Burns due to hot metal on the device and hot flasks
 Only touch the device and flasks when wearing protective gloves.
WARNING!
Risk of crushing due to missing auxiliary aid
 Lifting and transporting the shaker without suitable technical aids can result in crushing and
other injuries.
 Use a hydraulic lifting platform to install and uninstall the shaker.
CAUTION!
Risk to health due to lifting heavy loads
 Only lift the device with another person or using a suitable aid.
 Make sure to use a transport aid for transportation over long distances.
NOTICE!
Damage to electronic components due to condensation
Condensation can form inside the device after the device has been moved from a cool to a
warmer environment.
 Wait at least three hours before connecting it to the mains/power supply.
2
Safety