Eppendorf Biological Shakers Innova 44R - Manual (Page 66)

Biological Shakers Innova® 44/44R — Operating manual
66
If a command has additional arguments, the ASCII space control character separates each
argument. The command is terminated using the ASCII carriage return control character; an
optional line feed control character may also be included but must follow the carriage return
character.
When a command is sent that returns data, the characters returned are in ASCII format. Each
additional argument returned will be separated by the ASCII space or tab control character; refer
to the selected command for the actual format. Data returned is terminated with a carriage return
line feed control character sequence.
The next section provides an Index to the 2 character command codes.
The next four sections provide command sets for your use for Set Commands, Profile Control
Commands, Report Request Commands and Set/Get Date & Time.
15.3 Index to command codes
15.4 Set commands
Command Code Meaning
CL Command Grow Lamp
CS Command Speed
CT Command Temperature
CU Command UV Lamp
PC Clear Profile
PM Profile Mode
PR Read Profile Step in Memory
PS Profile Stop/Start
PW Write Profile Step to Memory
RI Report Software Version
RP Report Parameter List
RS Report Setpoint Values
RV Report Measured Values
=D Set Date and Time
?D Get Date and Time
Code Meaning Format
CL
Command Grow Lamp CL where Arg1=Set Grow
Lamp state (0 = off, 1 = on)
CS
Command Speed CS where Arg1= Agitation
setpoint (####)
CT
Command Temperature CT where Arg1= Temperature
setpoint (###.#)
CU
Command UV Lamp CU where Arg1= Set UV Lamp
state (0 = off, 1 = on)
15
Appendix A: Remote programming