Eppendorf Biological Shakers Innova 44R - Manual (Page 30)

Biological Shakers Innova® 44/44R — Operating manual
30
Tab. 3: Display Icons
7.5 Alarms
If an alarm condition exists, the field in the lower right corner will alternate the Day and Time with
characters indicating the nature of the alarm condition, accompanied by an audible alarm (unless
muted) (see Table below):
7.5.1 Optional remote alarm
The Innova 44/44R can be equipped with a factory-installed remote alarm component (part
number M1320-8029). When it is hooked up to your relay and receiving equipment, this device
will send notification of an alarm condition to the remote location you choose.
Icon Explanation
This icon appears when audible alarms are muted.
This icon appears when the possibility to make manual or programmed
parameter changes is disabled (locked). This is controlled by settings on the
SET screen (see Setup screen on p. 40).
This icon appears when the shaker door is open.
This icon appears when the Heater is on (see Heater on p. 31).
This icon appears when a user-defined Program is running (see Program
the shaker on p. 45).
This icon appears to the right of °C if the Temperature Offset feature is being
used (see Temperature offset calibration on p. 49).
Indication Description
TEMP
The temperature deviates more than ±1 °C from setpoint after achieving control
temperature range. After door is opened, alarm will be disabled for 5 minutes
while chamber recovers to setpoint.
RPM
The speed deviates more than ±5 RPM from setpoint after achieving operating
speed setpoint. After door is opened, alarm will be disabled for 5 minutes while
chamber recovers to setpoint.
POWER
Indicates unit is powering up (both at normal power-up and after power
interruption); will flash until the Control Knob is moved.
HRS Indicates when timed run is completed.
TILT
Indicates an unbalanced shaking condition. After load is evenly distributed and/or
shaker is leveled, restart by pressing START/STOP.
7
Feat
ures