Eppendorf Biological Shakers Innova 44R - Manual (Page 19)

19
Biological Shakers Innova® 44/44R — Operating manual
Abb. 6: Mount Shaker on Base
Fig. 6: Mount Shaker on Base
5. Using the 1/2 – 13 x 1 1/4 in screws, lock washers and washers provided, mount the rear
braces on the base. Do not fully tighten the screws yet.
6. Mount the rear of the Innova 44/44R to the corner braces on the base, using the 1/2 – 13 x 1
1/4 in screws, lock washers and washers provided. Do not fully tighten the screws yet.
7. Mount the front corner braces to the base using two sets of the 1/2 – 13 x 1 1/4 in screws,
lock washers and washers provided. Do not fully tighten the screws yet.
8. With the remaining 1/2 – 13 x 1 1/4 in screws, lockwashers and washers, attach the front
corner braces to the unit.
9. Tighten all screws equally. With the corner braces securely in place, the shaker mounted on
its base will look as shown (see Fig. 7 on p. 20):
1 Innova 44/44R 2 Remove 1/2 – 13 Set Screws from holes that match
corner braces on both sides of unit.
3 1/2 – 13 x 1 1/4 in screw 4 Note: Feet removed
1
2
2
3
4
6
Installation