Eppendorf FemtoJet - Manual (Page 28)

26
3 Mode of operation
FemtoJet

(rear) with all connection options, with power unit 5171/
InjectMan 5179
1 Foot control (optional) with Inject function
2 Hand control with Inject and Clean functions
3 FemtoJet

4 Micromanipulator 5171 or InjectMan

5 Connection socket of micromanipulator for
Transmission cable 5246 ("Y cable")
6 Transmission cable 5246
(accessory for Micromanipulator 5171 and InjectMan

)
7 Interface cable 5171 (optional)
(Connection from FemtoJet

to Transmission cable 5246 "Y cable")
8 Interface of FemtoJet

to micromanipulator
3.7 Functions
The Function menu is called up using the key. One of seven
functions is selected using left-hand variable regulator p
i
. The relevant
functionality is assigned to the variable regulators in the bottom line of the
display.
Exit the Function menu by pressing the key again.
In cases of error, pressure control is switched off from within the Function
menu. Then exit the Menu using the
key.
Function 6, self-test, is described in Section 5, "Troubleshooting".
1 2 3 4 5 6 7 8
03_Bedien_en.fm Seite 26 Mittwoch, 27. September 2006 5:12 17