beautypg.com

Apple PowerBook G3 User Manual

Page 80

background image

You connected to another computer, but you can’t see any files.

m Make sure that files are being shared on the other computer. The File

Sharing control panel on that computer lists the items being shared.

m Make sure you have the access privileges you need to view the files. Ask

the network administrator or the owner of the shared item to give you
access. (See the “Sharing Files” topic area of Mac OS Help, available in the
Help menu.)

A message says that a disk can’t be ejected because it’s being shared.

When you have file sharing turned on, you can’t eject disks (other than floppy
disks) that were connected to your computer when you started it up. You can
eject the disk by turning off file sharing in the File Sharing control panel.
After you’ve ejected the disk, you can turn file sharing back on.

A message says that file sharing can’t be turned on.

m Make sure AppleTalk is turned on in the Chooser.

m Make sure you have at least 1 MB of available space on your hard disk.

m Some disk-formatting programs don’t work with file sharing. If you use such

a program, contact the manufacturer or vendor for compatibility information.

m There may be a problem with some of the information your computer

uses to start up file sharing. Follow these steps in order until the problem
is solved:

1. Open the File Sharing control panel and enter new information in the

Owner section. Then try again to turn on file sharing.

2. Remove the File Sharing folder from the Preferences folder (inside the

System Folder). Then restart the computer and try to turn on file sharing.

3. Reset the parameter RAM. (For instructions, see “The Computer Makes

an Unusual Sound at Startup, or You See a ‘Sad Macintosh’ Icon,” in the
section “Problems Starting Up the Computer” earlier in this chapter.)
Afterward, make sure to turn AppleTalk back on and select the correct
network type in the Network control panel.

4. Remove the Users & Groups data file from the Preferences folder

(inside the System Folder). Restart the computer.

5. Reinstall system software.

80

Chapter 5