Apple PowerBook G3 - Manual (Page 7)

Turning the computer on
To turn on the computer for the first time and prepare it to record any settings
you establish, follow these steps.
1 Press the Power key at the upper-right corner of the keyboard to turn the computer on.
You should hear a tone when you turn on the computer. It takes the computer
a few moments to start up.
As the computer starts up, several messages appear on the screen.
2 To be certain that the computer saves any new settings you establish as you work with
it, press and hold the Power key for 2 seconds.
A message appears, asking whether you want to shut down the computer.
3 In the message on the screen, click Restart.
To click Restart, move your finger on the trackpad to move the arrow on
the screen until the tip of the pointer is on Restart and press the trackpad
button once.
The computer turns off briefly, then starts up again.
Note: You only need to use this restart procedure the first time you turn on
the computer or after the battery has been completely discharged or has been
out of the computer for three days or more.
P
Power key
7 Getting Started