Engine cooling system, Page 52 – SkyTrak 6036 Operation Manual User Manual
Page 58

Page 52
6036/6036T
OA0242
Figure 27
COOLANT
OVERFLOW BOTTLE
OIL FILL CAP
OIL FILTER
DIPSTICK
2.
Unlock and open the right rear engine access
door. Check level of coolant in overflow bottle
(Figure 27). When coolant is hot, bottle should be
1/2 to 3/4 full. When coolant is cool, bottle should
be 1/4 to 1/2 full. Add coolant as required through
the overflow bottle (50/50 mixture of ethylene
glycol and water). Close and lock access door.
Figure 26
OF0120
WING NUT
SAFETY ELEMENT
3.
Engine Cooling System
A.
Level Check (Daily or 10 Hour Intervals)
1.
Level the vehicle, ground the carriage, place travel
select lever in Neutral (N), engage the emergency
brake switch and shut off the engine.
C. Air Intake System - Inspection (250 Hour Intervals)
Inspect the intake piping for cracked hoses, loose
clamps, or punctures which can allow dirt or debris to
enter the combustion chamber. If dirt or debris is
allowed to enter the combustion chamber, it can
severely damage the engine. If necessary tighten or
replace parts to prevent air intake system leakage.