Poison Spyder JK REAR CRUSHER FLARES User Manual

Installation instruc tio ns, Jk rear crusher flares installation

INSTALLATION INSTRUC

TIO

Thank you for purchasing Poison Spyder Rear

Crusher Flares for your Jeep JK. Installation

is fairly simple with the right tools and good

mechanical abilities. If you are not confident in

your mechanical skills, please seek the help of a

professional to perform the installation. Please

read through these entire instructions before

proceeding with installation.

PARTS LIST
Please check your packages immediately upon

arrival to ensure that everything listed is included,

and to check for damage during shipping. If

anything is missing or damaged, call Poison

Spyder at (951) 849-5911 as soon as possible.

(1) Right side JK Rear Crusher Flare
(1) Left side JK Rear Crusher Flare
(1) Right-front Inner Brace, JK Rear Cr. Fl.
(1) Right-rear Inner Brace, JK Rear Cr. Fl.
(1) Left-front Inner Brace, JK Rear Cr. Fl.
(1) Left-rear Inner Brace, JK Rear Cr. Fl.
(14) 5/16-18 nut-sert
(14) 5/16-18 X 1 SS flat head cap screw
(16) 5/16-18 X 3/4 SS button head cap screw
(4) 5/16-18 X 2 SS flat head cap screw
(40) 5/16 flat washer

(20) 5/16-18 nylon insert lock nut
(1) Nut-Sert Install Tool

TOOLS NEEDED

• 1/2” open end wrench
• 3/16” hex key or driver bit and ratchet
• 1/2” drill motor
• 17/32” drill bit
• 5/16” drill bit
• Removal tool for

push-in retainer

clips (see figure 1)

• Touch-up paint or

clear coat

BEFORE YOU BEGIN
OPEN YOUR PACKAGES AND INSPECT THE

CONTENTS IMMEDIATELY. Contact Poison

Spyder customer service at 951-849-5911

immediately to report any missing, damaged

or defective items, including the hardware

pack. Poison Spyder Customs, Inc. can not

be responsible for claims of missing items or

damage due to shipping or packaging, when

notified more than seven days after delivery.

JK REAR CRUSHER FLARES INSTALLATION

FIGURE 1