Poison Spyder JK LED TAILLIGHT HARNESS - Manual (Page 3)

INSTALLATION INSTRUC
TIO
NS
Poison Spyder Customs • JK LED Taillight Harness Installation Page 3
©2014 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
described in the previous step. For backup
lights mounted below or next to the LED
taillight, use the short 4” extension harness.
If no backup lights are used, simply leave the
plastic plugs in place on the harness.
8. Use zip-ties or other means to secure all
wiring in place, both inside the Jeep’s corner
cavity and wherever extension wires have
been routed.
9. Plug the 4” LED taillight into the harness,
push the remainder of the harness through
the taillight hole, and install the taillight with
its rubber grommet
10. Repeat these steps for the driver’s side
harness (omitting the procedures for the LED
License Plate & 3rd Brake Light).
Congratulations, you have completed the
installation of your Poison Spyder JK LED
Taillight Harness!