30fs2 / 30fs3 / 30fs4 series, with gearbox, Fb50 / fb75 / fb100 series, bell housing mount – Hale 80FC User Manual
Page 20

❑ Introduction
20
Pump Ends
p/n: 029-0020-61-0
❑
Pump delivers discharge pressures up to 800 PSI (55 BAR) and flow
rates up to approximately 100 GPM (379 LPM / 6 LPS), NFPA 1901
performance rated.
❑
Suction — 2” (51 mm) female NPT flange
❑
Discharge — 1-1/2” (38 mm) female NPT
30FS2 / 30FS3 / 30FS4 Series, with Gearbox
❑
Standard centrifugal pump and gearbox assembly with universal
mounting bracket designed to bolt directly to either SAE #8 or #10
engine flywheel housing and available for gasoline or diesel engines.
❑
Pump delivers discharge pressures up to 300 PSI (21 BAR) and flow
rates up to approximately 400 GPM (1,514 LPM / 25 LPS), NFPA
1901 performance rated.
❑
Suction — 3” (76 mm) female NPT flange / 4” (102 mm) Victaulic
®
❑
Discharge — 2” (51 mm) female NPT / #115 flange
40FB / 50FB Series, Bell Housing or Pedestal Mount (-U-U and -U-M Series)
❑
Standard centrifugal pump end with universal mounting bracket
designed to bolt directly to either SAE #10 or #11 engine flywheel
housing and available for gasoline or diesel engines.
❑
Pump delivers discharge pressures up to 250 PSI (17 BAR) and flow
rates up to approximately 800 (40FB) and 1,000 (50FB) GPM (3,028 -
3,785 LPM / 51 - 63 LPS), NFPA 1901 performance rated.
❑
Suction — 5” (127 mm) female NPT flange, optional
❑
Discharge — 4” (102 mm) female NPT flange, optional
FB50 / FB75 / FB100 Series, Bell Housing Mount
❑
Standard centrifugal pump end with universal mounting bracket
designed to bolt directly to either SAE #4 or #3 engine flywheel hous-
ing and available for gasoline or diesel engines.
❑
Pump delivers discharge pressures up to 350 PSI (24 BAR) and flow
rates up to approximately 500 (40FB) and 1,000 (50FB) GPM (1,893 -
3,785 LPM / 32 - 63 LPS), NFPA 1901 performance rated.
❑
Suction — 4-1/2”, 5” or 6” (114 mm, 127 mm or 152 mm)) male NS
thread
❑
Discharge — 2-1/2” (64 mm) female NS thread, or optional 3” (76 mm)
valve
❑
Blank Flange Option — 2-1/2”, 3” up to 5” (64 mm, 76 mm up to 127
mm). Consult Hale Products for additional information and various
tube lengths available.