Hale MBP Booster User Manual
Aps/mbp silencer series booster pumps, Operation and maintenance manual
This manual is related to the following products:
Table of contents
Document Outline
- APS/MBP Booster Pump Operation & Maintenance Manual, 029-0020-83-0
- NOTICE !
- Contents
- 1 Safety Precautions
- 2 Introduction
- 3 Operation
- 4 Preventive Maintenance
- 5 Troubleshooting
- Figure 5-1: Sample, Serial Nameplate
- Figure 5-2: Troubleshooting Charts
- PTO Will Not Engage
- Pump Loses Prime...
- Insufficient Pump Capacity
- Insufficient Pressure
- Valve Remote Contorl...
- Engine Speeds Too HIGH...
- Cavitation
- Relief Valve Does Not Relieve...
- Relief Valve Does Not Recover...
- Relief Valve Opens...
- Unable to Optain Proper Setting...
- Discharge Valves Difficult...
- Water in Pump Gearbox
- Rotation Symptoms
- 6 Repair
- Figure 6-1: Silencer Series Booster Pump
- Figure 6-2: Gearbox Capacity / Recommended Lubricants
- Table 6-3: Torque Values Chart
- 6.1 Overview
- 6.2 General Repair Guidelines
- 6.3 Pump and Gearbox Assembly
- 6.4 Servicing the Booster Pump
- 6.5 Mechanical Seal Assembly
- 6.6 Pump head
- 6.7 “B” Series Gearbox
- 6.8 Dismantle the B Series Gearbox
- 6.9 Available options
- 7 Installation
- 8 Maintenance Kits
- Appendix A: Glossary
- Appendix A-1: Measurements
- Appendix C: Alternate Lubricant Manufacturers
- Appendix D: Hose Friction Loss
- Express Warranty
- Drawings - Plate #
- APS Installation & Identification, Plate # 1027A
- MBP Installation & Identification, Plate # 1026A
- Anit-Corrosion Anode, Plate # 869A
- ESP Priming Pump, Plate # 821A
- P Series Relief Valve, Plate # 547C
- PVG Priming Valve, Plate # 480G
- PTO Shift Indicator Lights, Plate # 825A
- SPV Priming Valve, Plate # 828A
- TRV/TRVM Relief Valve, Plate # 729A
- Return HOME Page
- EXIT CDROM