Konica Minolta MAGICOLOR 4695MF - Manual (Page 289)

Solving Other Problems 275
Printing
takes too
much time. The machine is set to
a slow printing mode
(for example, thick
stock or transpar-
ency). It takes more time to print with special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
The machine is set to
power saving mode. It takes time for printing to start in
power saving mode.
The job is very com-
plex. Wait. No action needed.
There is not enough
machine memory. Install the optional memory to increase
the machine's memory capacity.
A toner cartridge for a
different region or an
unapproved toner
cartridge is installed
(
Wrong Toner X
is displayed in the
message window).
Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific machine.
If an error has been
detected during print-
ing job transmission
in the Copy mode, it
takes a while to pro-
cess the error and
resume the printing
operation. Wait. No action needed.
Blank pages
are printed. One or more of the
toner cartridges are
defective or empty. Check the toner cartridges. The image
will not print correctly or not at all, if the
cartridges are empty.
The wrong media is
being used. Check that the media type.
Symptom Cause Solution