beautypg.com

Replacing the fuser unit, Replacing the fuser unit 227 – Konica Minolta MAGICOLOR 4695MF User Manual

Page 241

background image

Replacing Consumables

227

Replacing the Fuser Unit

When the time to replace the fuser unit is reached, the message

Fuser

Unit Life

appears. Printing can continue even after this message

appears; however, since the print quality is reduced, the fuser unit should be
replaced immediately

1

Turn off the machine and discon-
nect the power cord and inter-
face cables.

Note

There are extremely hot parts within the machine. Before replacing the
fuser unit, wait about 20 minutes after turning off the machine, and then
check that the fusing section has reached room temperature, otherwise,
you may get burnt.

2

Open the machine's front cover.