Konica Minolta MAGICOLOR 4695MF - Manual (Page 188)

Scanning With the Machine 174
Scanning With the Machine
The machine keys can be used to make scans. This operation differs from
scanning from a computer application since the destination of the scan data
can also be specified.
"
Before scanning, check that the Scan key is lit up in green. If the key
is not lit up in green, press the Scan key to enter Scan mode.
"
If, while specifying settings, no key is pressed for the length of time
specified for
AUTO PANEL RESET , the entered settings are can-
celed and the main screen (Scan mode) is displayed.
Basic Scanning Operation
1
Position the document to be
scanned.
"
For details on positioning
the document, refer to
“Placing a document on
the original glass” on
page 135 and “Loading a
document into the ADF”
on page 136.
2
Press the Scan key to enter Scan mode.