Konica Minolta MAGICOLOR 4695MF - Manual (Page 177)

Making Advanced Copies 163
Setting Duplex (Double-Sided) Copying
Duplex (Double-Sided) Copying From the ADF
With duplex (double-sided) copying, two single-sided document pages can be
scanned with the ADF and printed onto a single sheet of paper.
1
In the main screen (Copy mode), press the + or , key to select the cur-
rent simplex/duplex (single-sided/double-sided) setting, and then press
the Select key.
2
Press the + or , key to select 1-SIDE → 2-SIDE , and then press the
Select key.
3
Press the + or , key to select LONG EDGE or SHORT EDGE , and then
press the Select key.
The main screen (Copy mode) appears again.
"
When LONG EDGE or SHORT EDGE is selected, duplex (Dou-
ble-Sided) copying is performed as described below.
If LONG EDGE is selected, the pages will be laid out to flip
at the sides.
If SHORT EDGE is selected, the pages will be laid out to flip
at the top.
1 1
1
1
2
3
1
3
1
2
1