beautypg.com

Editing/deleting group dial destinations, Editing/deleting group dial destinations 192 – Konica Minolta MAGICOLOR 4695MF User Manual

Page 206

background image

Scanning With the Machine

192

Editing/Deleting Group Dial Destinations

Information registered with a group dial destination can be edited or deleted.

1

In the main screen (Scan mode), press the + or , key to select

UTIL-

ITY

, and then press the Select key.

2

Press the + or , key to select

DIAL REGISTER

, and then press the

Select key.

3

Press the + or , key to select

GROUP DIAL

, and then press the Select

key.

4

Use the keypad to type in the number (between 1 and 20) for the group
dial destination to be edited/deleted, and then press the Select key.
The information currently registered for the group dial destination appears
for about two seconds.

5

Press the + or , key to select

EDIT

to edit information or

DELETE

to

delete the destination, and then press the Select key.
If

DELETE

was selected, the settings are deleted, and the

DIAL REG-

ISTER

menu appears again.

6

If desired, edit the group name, and then press the Select key.

"

For details on entering/editing text, refer to “Entering Text” on page
323.

7

Press the + or , key to select

ADD

to add a speed dial destination,

CHECK

/

EDIT

to delete the destination or

FINISH

to finish editing, and

then press the Select key.
If

FINISH

was selected, the edited settings are saved, and the

DIAL

REGISTER

menu appears again. If

ADD

was selected, continue with step

6 of “Registering Group Dial Destinations” on page 191. If

CHECK/EDIT

was selected, continue with step 8.

8

Press the + or , key to select the speed dial destination to be deleted,
and then press the Stop/Reset key.

"

To check the settings for the selected speed dial destination, press
the Select key.

9

Press the + or , key to select

Yes

, and then press the Select key.

10

After the speed dial destination is deleted, press the Back key.

11

To delete another speed dial destination, repeat the procedure from step
8.