Konica Minolta MAGICOLOR 4695MF - Manual (Page 204)

Scanning With the Machine 190
Editing/Deleting Speed Dial Destinations
Information registered as a speed dial destination can be edited or deleted.
"
Machine key operations cannot be used to edit/delete an FTP address
or SMB address registered as a speed dial destination. These
addresses can be edited/deleted with Local Setup Utility (LSU) or
PageScope Web Connection. For details, refer to the Reference
Guide on the Documentation CD/DVD.
1
In the main screen (Scan mode), press the + or , key to select UTIL-
ITY , and then press the Select key.
2
Press the + or , key to select DIAL REGISTER , and then press the
Select key.
3
Press the + or , key to select SPEED DIAL , and then press the Select
key.
4
Use the keypad to type in the number (between 1 and 220) for the speed
dial destination to be edited/deleted, and then press the Select key.
The information currently registered for the speed dial destination
appears for two seconds.
5
Press the + or , key to select EDIT to edit information or DELETE to
delete the destination, and then press the Select key.
If
DELETE was selected, the settings are deleted, and the DIAL REG-
ISTER menu appears again.
6
Use the keypad to edit the registration name, and then press the Select
key.
"
For details on entering/editing text, refer to “Entering Text” on page
323.
7
Use the keypad to edit the e-mail address, and then press the Select key.
The edited settings are saved, and the
DIAL REGISTER menu appears
again.
"
If the edited speed dial destination is registered in the favorite list
or with a group dial destination, a confirmation message asking
whether or not to keep the destination registered as it is appears
after the operation in step 7 is performed. To keep the destination
registered as it is, select
Yes . To cancel the registration, select
No .