beautypg.com

Reducing and splitting, Reducing and splitting -12 – Konica Minolta bizhub C35 User Manual

Page 81

background image

Printing received faxes

4-12

Step 2: Determining the actual paper size used for printing

The machine checks if paper of the most suitable size determined in step 1 is
loaded.

„

If paper of the most suitable size is loaded, printing begins.

„

If paper of the most suitable size is not loaded, or if the Auto Tray Switch
function is disabled, the machine checks for paper of the next most suit-
able size in the order listed in the following table, starting from the top.

"

If no paper suitable for printing is loaded in a paper drawer, a message
appears, instructing that paper be loaded.

"

For details on the Auto Tray Switch function, refer to the [Printer/
Copier/Scanner User
s Guide].

Reducing and splitting

The following four reducing and splitting operations are performed when a
received document is printed, depending on the selected settings.

"

For details on the reducing and splitting settings for printing received
documents, refer to “[Function Settings]” on page 2-12.

When [Tray Selection for RX Print] is set to a specific

drawer

„

If the received document is the same size or is shorter than the paper
loaded in the drawer, the image is printed reduced by the specified reduc-
tion ratio (between 87% and 96%).

„

If the received document is longer than the paper loaded in the drawer,
the image is automatically reduced (between 75% and 96%) and printed.
If the received document still does not fit within the paper, even after being
reduced up to 75%, any part of the image that does not fit within the paper
will be lost.

„

The pages cannot be split.

Most suitable paper
size

A4

Letter

Legal

Order for selecting
paper

(from top to bottom)

A4

Letter

Legal

A4

Letter

Legal

A4