Konica Minolta bizhub C35 - Manual (Page 65)

Sending to multiple destinations (broadcast transmissions) 3-20
Sending to multiple destinations (broadcast
transmissions)
The same document can be sent to multiple destinations with a single opera-
tion.
If all of the desired destinations are selected when sending the fax, the same
document will be sent to each of the specified destinations. A broadcast
transmission can be specified as a timer transmission.
Use any of the following methods to specify destinations for broadcast trans-
missions.
„ Selecting from registered destinations (up to 500 destinations) (page 3-7)
„ Directly typing in the address (up to 100 destinations, including the desti-
nations with an LDAP search) (page 3-8)
„ Selecting with an LDAP search (up to 100 destinations, including the des-
tinations with direct input) (page 3-10)
„ Selecting a group destination (page 3-7)
„ Selecting a program destination (page 3-21)
"
For details on destination types and their registration procedures, refer
to “Registering destinations” on page 6-1.
"
The results of the broadcast transmission can be viewed in the Broad-
cast Result Report. For details, refer to “Broadcast Result Report” on
page 7-9.
"
When the broadcast transmission destinations include both G3 fax
and Internet fax destinations, the document cannot be sent with the
[Super Fine] Resolution setting (400 × 400 dpi).
"
When the broadcast transmission destinations include both G3 fax
and Internet fax destinations, the timer transmission function cannot
be used.
"
Internet faxing is not compatible with a destination search of an LDAP
server.