Comm. settings, Comm. settings] -10 – Konica Minolta bizhub C35 User Manual
Page 35
[Fax Settings] (Admin Settings)
2-10
[Comm. Settings]
[Footer Position]
Settings
[Inside Body Text] / [Outside Body Text] /
[RX Ft. OFF]
Select the position for the reception information
(reception time and reception number) printed in doc-
uments received by this machine.
If [RX Ft. OFF] is selected, the reception information
is not printed.
Item
Description
[PB/DP]
Settings
[PB] / [10pps] / [20pps]
Select the dialing method according to the operating
environment being used.
"
The default setting differs depending on the
setting selected for [Admin Settings] - [Fax
Settings] - [Fax Target]. If [Fax Target] is set to
a country that is not compatible with [20pps],
[20pps] does not appear.
[RX Mode]
Settings
[Auto RX] / [Manual RX] / [DRPD]
Select the reception method.
[Auto RX]: Automatic reception
[Manual RX]: Manual reception; Select this setting if
an external telephone is connected and the phone
line is often busy, or if remote reception is to be used.
[DRPD]: If the receiver rings with the pattern selected
from the four ring patterns available, the incoming call
is automatically received as a fax. If [DRPD] is
selected, select the ring pattern for faxing with [Ring
Pattern].
[Number of RX Call
Rings]
Settings
[1] - [15] ([2])
Specify how many rings are produced until the
machine begins receiving the fax when it is set for
automatic reception.
"
The available settings and the default setting
differ depending on the setting selected for
[Admin Settings] - [Fax Settings] - [Fax Target].
Item
Description