Konica Minolta bizhub C35 - Manual (Page 108)

Registering an address book destination 6-5
Internet fax
Internet fax destinations can be registered only from the PageScope Web
Connection.
For details on registering from PageScope Web Connection, refer to the [Ref-
erence Guide].
"
If [Admin Settings] - [Security Settings] - [Security Details] - [Manual
Destination Input] is set to [Restrict], a destination cannot be regis-
tered from the user mode of PageScope Web Connection.
[Line Settings] Configure the line used to send faxes.
[ECM OFF] The error correction mode (ECM) is turned off
to shorten the transmission time. ECM is an
error correction mode defined by ITU-T (Inter-
national Telecommunication Union Telecom-
munication Standardization Sector). Fax
machines equipped with the ECM feature
communicate with each other while confirming
that the data sent is free of errors.
[V34 OFF] V.34 is a communication mode used with
super G3 fax communication. When the
remote machine or this machine is connected
to a telephone line through a PBX, it may not
be possible to establish communication in
super G3 mode due to the condition of the
telephone line. In this case, it is recommended
that V.34 be turned off before sending data.
After the transmission has been completed,
this machine automatically turns on the V.34
mode.
[Check Dest. &
Send] The specified fax number is compared with
the remote fax number (CSI) and the data is
sent only if those fax numbers match. If they
do not match, the communication will fail,
resulting in a transmission error.
To verify the destination and send the fax, the
recipient’s fax number must be specified on
their fax machine.
Item Description