Konica Minolta bizhub C35 - Manual (Page 77)

Useful reception functions 4-8
„ Set [Closed Network RX Password] - [Enable] to [Yes].
„ With [Closed Network RX Password] - [Password], specify the password
for allowing the machine to be used with closed network receptions.
"
For details on the settings, refer to “[Closed Network RX Password]”
on page 2-15.
Fax forwarding (G3 fax/Internet fax)
Fax forwarding is the function for forwarding received documents to the previ-
ously specified destination.
In order to use fax forwarding, the following settings in the [Fax Settings]
screen ([Admin Settings]) must be specified.
„ Set [Forward TX Settings] - [Forward TX Setting] to [ON].
„ With [Forward TX Settings] - [Forwarding Address], specify the fax num-
ber of the forwarding destination.
„ With [Forward TX Settings] - [Forward & Print], select whether or not this
machine also prints the fax when it is forwarded.
"
For details on the settings, refer to “[Forward TX Settings]” on
page 2-15.
"
An Internet fax destination cannot be specified as the forwarding des-
tination.
"
If a document with a resolution of 300 × 300 dpi is received as an
Internet fax, this machine prints the document without forwarding it.
"
This function cannot be used together with PC fax reception, memory
reception or night reception.
E-mail forwarding (G3 fax/Internet fax)
E-mail forwarding is the function for forwarding received documents to the
previously specified destination.
In order to use e-mail forwarding, the following settings in the [Fax Settings]
screen ([Admin Settings]) must be specified.
„ Set [Forward TX Settings] - [Forward TX Setting] to [ON].
„ With [Forward TX Settings] - [Forwarding Address], press , and
then specify the e-mail address of the forwarding destination.