Initial settings, G3 fax settings, Date & time settings – Konica Minolta bizhub C35 User Manual

Page 22: Fax target, Sender settings, Comm. settings, Initial settings -13, G3 fax settings -13

Initial settings

1-13

Initial settings

After installation, settings must be specified for the following in order to use
the fax functions. Be sure to specify these settings correctly, otherwise fax
transmissions cannot be performed.

G3 fax settings

[Date & Time Settings]

Specify the current date and time.
For details on the settings, refer to the [Printer/Copier/Scanner User’s Guide].

[Fax Target]

Select the country where this machine is installed.
For details on the settings, refer to “[Fax Target]” on page 2-20.

[Sender Settings]

Specify the name and fax number of the sender (this machine).
For details on the settings, refer to “[Sender Settings]” on page 2-8.

[Comm. Settings]

Specify settings for the fax operating environment, such as the dialing method
and reception mode.
For details on the settings, refer to “[Comm. Settings]” on page 2-10.