Konica Minolta bizhub C35 - Manual (Page 75)

Useful reception functions 4-6
Useful reception functions
The various useful reception functions available with this machine are
described below.
Polling reception (G3 fax)
Polling reception is the function where a document queued for polling trans-
mission by the sender or a document saved on the sender’s bulletin board is
sent with a command from the recipient. This is useful when the recipient is to
incur the cost of the call.
Polling reception can be performed to receive a normal fax or to receive a fax
by specifying the sender’s bulletin board.
"
This function cannot be used together with ECM OFF, V34 OFF, pass-
word transmissions, timer transmissions, F-code transmissions or
Internet fax transmissions.
"
Multiple destinations cannot be specified.
Performing a polling reception
The procedure for using polling reception is described below.
1
Press [Fax] or press the [Fax] key to display the initial Fax screen.
2
Specify the destination.
3
Press [Settings].
4
Press [Comm. Settings].
5
Press [Comm. Method].
6
Press [Polling RX].
7
Press [Yes], and then select the reception method.
– To perform normal polling reception, press [Polling RX].
– To specify a sender’s bulletin board for polling reception, press [Bulle-
tin], and then use the keypad to type in the sender’s bulletin board
number.
– If information was incorrectly entered, press the [C] key to erase the
entered information.
8
Press [OK].
9
Press the [Start] key.
Polling reception begins.