Konica Minolta bizhub C35 - Manual (Page 47)

General operation 3-2
General operation
The general procedure for sending G3 faxes and Internet faxes is described
below.
1
Press [Fax] or press the [Fax] key to display the initial Fax screen.
– For details on the initial Fax screen, refer to “Initial Fax screen” on
page 1-8.
2
Place the document in the ADF
or on the original glass.
– For details on loading the
original document, refer to
“Positioning the original doc-
ument” on page 3-4.
3
Specify the destination.
– For details on specifying destinations, refer to “Specifying destina-
tions” on page 3-7.
– In the initial Fax screen, press [Mode Check] to check or change the
specified destinations.
4
Press [Settings], and then select the appropriate settings on the [Scan
Settings], [Comm. Settings] and [Original Settings] screens.
– For details on the [Scan Settings] screen, refer to “Specifying scan
settings” on page 3-11.
– For details on the [Comm. Settings] screen, refer to “Specifying com-
munication settings (G3 fax)” on page 3-13, “Useful transmission func-
tions (G3 fax)” on page 3-14 and “Specifying e-mail (Internet fax)
settings” on page 3-17.