Konica Minolta bizhub C35 - Manual (Page 13)

About the Control Panel 1-4
7 [Reset] key Press to clear the settings (except pro-
grammed settings) of all displayed functions.
8 [Interrupt] key/indica-
tor Press to enter Interrupt mode. While the
machine is in Interrupt mode, the indicator on
the [Interrupt] key lights up in green. To cancel
Interrupt mode, press the [Interrupt] key again.
9 [Stop] key Pressing the [Stop] key while copying, scan-
ning or printing temporarily stops the operation.
10 [Start (Color)] key Press to start color copying, scanning or fax-
ing.
Press to continue interrupted printing.
11 [Start] indicator Lights up in blue when copying, scanning or
faxing can be performed.
Lights up in orange when copying, scanning or
faxing cannot be performed.
12 [Start (B&W)] key Press to start black-and-white copying, scan-
ning or faxing.
Press to continue interrupted printing.
13 Keypad Use to enter the number of copies, a fax num-
ber, an e-mail address or a name.
Use to type in the various settings.
14 [C] (clear) key Press to erase numbers or text.
15 [Error] indicator Flashes in orange if an error occurred.
Lights up in orange when the service represen-
tative is being called.
16 [Data] indicator Flashes in blue while a print job is being
received.
Lights up in blue while printing or when a print
job is queued.
17 [Utility/Counter] key Press to display the [Utility Settings] screen.
In the [Utility Settings] screen, settings can be
specified for the parameters in the [Accessibil-
ity], [Meter Count], [Address Registration],
[User Settings] and [Admin Settings] screens.
No. Name Function