Konica Minolta IF-118 - Manual (Page 96)

Using Scan to Server (FTP) Operations 5
IF-118 5-3
5 Press the and keys to select
the resolution (150 × 150 dpi, 300 ×
300 dpi, or 600 × 600 dpi), and then
press the [YES] key.
❍ To specify detailed settings for the scan mode, press the key.
❍ For information on specifying detailed settings, refer to “Changing
the Scan Mode Settings” on page 4-6.
6 Press the and keys to select
“ADF”.
7 Press the [START] key.
The copier scans the document, then connects to the FTP server and
uploads the data.
✎
Tip
Up to 10 specified recipients can be notified by e-mail of the FTP
server address where a file was uploaded. When using
PageScope Light to register the speed dial information, select
“Enable Notification”. (Refer to “Adding a New Speed Dial (FTP
Server) Setting” on page 3-46.)