Konica Minolta IF-118 - Manual (Page 45)

3 Getting Ready
3-18 IF-118
3.2.2.3 Specifying Other E-mail Settings (“E-MAIL SETTING 2” Menu)
The settings for the E-MAIL SETTING 2 functions are specified from the
“E-MAIL SETTING 2” menu in Utility mode.
This section describes how to specify settings for the following functions.
G POP3 SERVER
G POP3 PORT NO.
G POP3 TIMEOUT
G POP3 ACCOUNT
G POP3 PASSWORD
G AUTO RECEPTION
G REPLY ADDRESS
G HEADER PRINT
✎
Tip
If you wish to cancel a change to a setting before applying it, press the
[NO] key. Press the [YES] key after the message “STOP SETTING?”
appears.
Specifying the POP3 Server Address
1 Press the [UTILITY] key. The Utility
mode menu appears.
2 Press the or key until “E-
MAIL SETTING 2” appears.
3 Press the [1] key on the 10-key pad
to select “POP3 SERVER”.
4 Enter the IP address or host name
of the POP3 server.
❍ For information on entering text,
refer to “Entering Text Characters” on page 2-10.
❍ Up to 64 characters can be entered for the host name.
[ ]