Konica Minolta IF-118 - Manual (Page 40)

Getting Ready 3
IF-118 3-13
5 Press the [YES] key.
The E-MAIL SETTING 1 screen appears again.
Registering the E-mail Address of the Sender
1 From the “E-MAIL SETTING 1 ”
menu in the Utility mode, press the
[2] key on the 10-key pad to select
“E-MAIL ADDRESS”.
2 Enter the e-mail address of the
copier.
❍ For information on entering text,
refer to “Entering Text Characters” on page 2-10.
❍ Up to 64 characters can be entered for the sender address.
❍ Consult your network administrator for information about the e-mail
address to use.
❍ If you do not receive e-mail on the copier, enter the e-mail address
of the administrator.
3 Press the [YES] key.
The E-MAIL SETTING 1 screen appears again.
Specifying the SMTP Server Address
1 From the “E-MAIL SETTING 1 ”
menu in the Utility mode, press the
[3] key on the 10-key pad to select
“SMTP SERVER”.
2 Enter the IP address or host name
of the SMTP server.
❍ For information on entering text,
refer to “Entering Text Characters” on page 2-10.
❍ Up to 64 characters can be entered for the host name.
❍ The DNS settings must have been specified before the host name
for the SMTP server can be specified.
❍ The illustration at the right is an example of a host name. Consult
your network administrator for details about this setting.
3 Press the [YES] key.
The E-MAIL SETTING 1 screen appears again.
[ ]
[ ]