2 specifying the network settings, 1 quick overview of the network settings, Specifying the network settings -2 – Konica Minolta IF-118 User Manual
Page 29: Quick overview of the network settings -2
3
Getting Ready
3-2
IF-118
3.2
Specifying the Network Settings
Depending on the network environment in which the copier is located,
there may be some restrictions on the network functions that the copier
can use. Specify the network settings to suit the functions and
environment required for your configuration.
The network settings can be specified from the control panel of the copier
or using the Administrator mode of PageScope Light.
3.2.1
Quick Overview of the Network Settings
Function
Description
Internet
Faxing
Scan
to E-
mail
Scan
to
Server
Direct
Fax
Setting
Control
panel
PageScope
Light
2: Required; -: Unnecessary;
●: As necessary
2 : Possible
- : Not possible
NETWORK SETTINGS
IP
ADDRESS
This function is
used to specify
the IP address
for the copier.
Consult your
network
administrator
for information
about the IP
address to use.
2*2
2*2
2*2
2*2
2
2
SUBNET
MASK
This function is
used to specify
the subnet
mask value for
the network.
Consult your
network
administrator
for details.
2*2
2*2
2*2
2*2
2
2
GATEWAY This function is
used to specify
the default
gateway (IP
address) of a
router on the
network.
Consult your
network
administrator
for details.
2*2
2*2
2*2
2*2
2
2