Konica Minolta IF-118 - Manual (Page 46)

Getting Ready 3
IF-118 3-19
❍ The DNS settings must have been specified before the host name
for the POP3 server can be specified.
❍ The illustration at the right is an example of a host name. Consult
your network administrator for details about this setting.
5 Press the [YES] key.
The E-MAIL SETTING 2 screen appears.
Specifying the POP3 Port Number (“POP3 PORT NO.” Function)
1 From the “E-MAIL SETTING 2 ”
menu in the Utility mode, press the
[2] key on the 10-key pad to select
“POP3 PORT NO.”.
2 Enter the port number for the POP3
server.
❍ For information on entering text,
refer to “Entering Text Characters” on page 2-10.
❍ The port number can be set between 1 and 65535.
❍ Normally, port number 110 is used.
3 Press the [YES] key.
The E-MAIL SETTING 2 screen appears again.
Specifying the Timeout Period for the POP3 Server (“POP3
TIMEOUT” Function)
1 From the “E-MAIL SETTING 2 ”
menu in the Utility mode, press the
[3] key on the 10-key pad to select
“POP3 TIMEOUT”.
2 Enter the timeout period (in
seconds).
❍ For information on entering text,
refer to “Entering Text Characters” on page 2-10.
❍ The timeout period can set between 30 and 300 seconds.
3 Press the [YES] key.
The E-MAIL SETTING 2 screen appears again.
( ) e