Konica Minolta IF-118 - Manual (Page 109)

6 Using Internet Faxing Operations
6-10 IF-118
5 Select the destination, and then press the [YES] key.
Repeat this step until all of the recipients have been specified.
❍ The destinations can be specified using the one-touch dial or
group dial keys, speed dial numbers, or the phone book. They can
also be entered directly using the 10-key pad.
❍ If the 10-key pad is being used to enter the address, you can press
the
key after entering the e-mail address to specify detailed
transmission mode settings. For information on specifying these
settings, refer to “Changing the Transmission Mode Settings” on
page 6-6.
✎
Tip
If an incorrect destination has been specified, press the [NO] key
to delete the current selection. (You can only delete a destination
in this way if it is done before the [YES] key has been pressed to
confirm the recipient.)
6 Press the [START] key.
A message appears allowing you decide whether or not to check the
selected destinations.
7 To check the destinations, press the
[YES] key.
❍ If you do not want to check the
destinations, go to step 9.
8 Press of the [YES] key to display
each destination specified in step 5.
❍ To delete the destination that is
displayed, press the [NO] key.
❍ After all of the destinations have
been checked, the message
“Fin.=START” appears.
9 Press the [START] key. Scanning starts, and the scan data is sent to
the specified destinations.