Konica Minolta IF-118 - Manual (Page 61)

3 Getting Ready
3-34 IF-118
12 Press the and keys to
select the compression method
(“MH”, “MR”, or “MMR”).
13 Press the [YES] key.
The settings are registered. To add information for other one-touch
dial keys, repeat steps 4 through 13.
14 Press the [NO] key when you have
finished adding addresses.
The FAX REGISTRATION screen
appears again.
Specifying the Settings for a Speed Dial Number
1 Press the [UTILITY] key.
2 Press the or key until “FAX
REGISTRATION” appears.
3 Press the [2] key on the 10-key pad
to select “SPEED DIAL”.
4 Use the 10-key pad to enter the 3-
digit speed dial number where you
wish to add an address. (Example:
011)
5 Enter the recipient name.
❍ For information on entering text,
refer to “Entering Text
Characters” on page 2-10.
❍ Up to 20 characters can be entered for the recipient name.
6 Press the [YES] key.
7 Enter the e-mail address of the
recipient.
❍ For information on entering text,
refer to “Entering Text Characters” on page 2-10.
❍ Up to 64 characters can be entered for the e-mail address.