Konica Minolta IF-118 - Manual (Page 48)

Getting Ready 3
IF-118 3-21
Setting Up Auto Reception
1 From the “E-MAIL SETTING 2 ”
menu in the Utility mode, press the
[6] key on the 10-key pad to select
“AUTO RECEPTION”.
2 Press the and keys to
select “ON” or “OFF”, and then
press the [YES] key.
❍ If “ON” is selected, the screen used to specify the time interval for
checking e-mail appears. (Go to step 3.)
❍ If “OFF” is selected, the E-MAIL SETTING 2 screen appears again.
3 Specify the time interval (in
minutes) for checking e-mail.
❍ The time interval for
automatically checking for new e-mail messages can be set
between 1 minute and 60 minutes.
4 Press the [YES] key.
The E-MAIL SETTING 2 screen appears again.
Specifying the Address for Result Notifications
1 From the “E-MAIL SETTING 2”
menu in the Utility mode, press the
[7] key on the 10-key pad to select
“REPLY ADDRESS”.
2 Enter the e-mail address to which
error notifications should be sent.
❍ For information on entering text,
refer to “Entering Text Characters” on page 2-10.
❍ Up to 64 characters can be entered for the reply address.
❍ Normally, the reply address is set to the e-mail address of the
administrator.
3 Press the [YES] key.
The E-MAIL SETTING 2 screen appears again.
[ ]