Konica Minolta IF-118 - Manual (Page 88)

Using Scan to E-mail Operations 4
IF-118 4-11
4.3 Specifying the Destination Using Speed Dial
Numbers
✎
Note
The speed dial setting must have already been specified.
For information on setting up speed dial numbers, refer to “Adding
Destinations” on page 3-32.
1 Press the [SPEED DIAL] key, and
then use the 10-key pad to enter the
3-digit speed dial number
programmed with the e-mail
address where you want to send the
scan data.
❍ If you make a mistake, press the
[NO] key, and then enter the
correct number.