Konica Minolta BIZHUB C652DS User Manual
Page 325
bizhub C652/C652DS/C552/C552DS/C452
3-26
3.4
Network Error Codes
3
12264
Unable to perform verification because there are too many certifi-
cates to be validated (the maximum number of certificates that
can be verified at a time is 20).
12266
Internal error of the certificate validation.
12267
The device certificate does not exist.
12268
No certificate is sent from the server.
User authentication
1
Invalid parameter (e.g. the number of characters exceeds the limit,
blank).
The authentication function setting is disabled.
2
Failed to resolve the name using the DNS server.
3
Unable to find the authentication server.
4
Failed to authenticate.
5
Failed to allocate memory.
An unexpected error occurred (which does not occur under nor-
mal usage conditions).
6
An authentication request is received while an internal task of the
user authentication client is being performed.
7
The connection was interrupted while the user authentication was
being performed.
10000
Failed in authentication using a PKI card.
12236
The certificate has expired, or the validity period has not yet start-
ed.
12239
The certificate does not have the expected usage.
12240
The certificate is not trusted. To trust the certificate, the certificate
must be registered to the system.
12241
The certificate has expired.
12242
The CA server rejected the connection.
12243
The connection to the server that checks for expiration of the cer-
tificate has timed out.
12244
Unable to check for expiration because the CRL size exceeds the
maximum capacity that can be retained (1MB).
12261
The format of the certificate is invalid.
12263
Although the environment is configured to use the HDD, it is una-
ble to perform validation because the HDD path has not been
specified.
12264
Unable to perform validation because there are too many certifi-
cates to be verified (the maximum number of certificates that can
be verified at a time is 20).
12266
Internal error of the certificate validation.
WebDAV client
0
When receiving a response: Successfully received data, but the
response body is missing.
When sending a request: Successfully sent data, and is waiting for
a response to be received.
1
When receiving a response: Successfully received data, and con-
tinuously receives the response body.
When sending a request: Successfully sent data, and is waiting for
an instruction to send the request body.
2
When receiving a response: Successfully received the response
body, and its reception has been completed.
When sending a request: The ID of the client that is not opened is
specified.
3
When receiving a response: The reception has timed out.
When sending a request: An invalid request method has been
specified.
Function
Code
Description