beautypg.com

Pcl setting, P. 2-227 – Konica Minolta BIZHUB C652DS User Manual

Page 245

background image

bizhub C652/C652DS/C552/C552DS/C452

2-227

2.61

Settings under "Print Setting"

2

2.61.2

Configuring the initial settings for the PCL print function

Configure the initial settings for the PCL print function.

PCL Setting

In the administrator mode of PageScope Web Connection, select "Print Setting" ö "PCL Setting".

Banner Sheet Setting

Select whether to print banner sheets for each print job.
Printing banner sheets prevents mixing different printing materials.

Banner Sheet Paper
Setting

Select the primary paper tray for printing banner sheets.

No Matching Paper in
Tray Setting

Select the operation to be taken when there is no appropriate sized paper in
the specified paper tray.
Select "Switch Trays (Tray Priority)" to supply paper from a different paper
tray.
Select "Stop Printing (Tray Fixed)" to stop printing and display a warning mes-
sage.

A4/A3<->LTR/LGR
Auto Switch

Converts between inch and metric units.
Select whether to print an A4 (Letter)/A3 (Ledger)-sized original by full size
when a paper tray containing Letter (A4)/Ledger (A3)-sized paper is selected.
Selecting "ON" forces full size printing, which may cause images be defective.

Binding Direction Ad-
justment

Select the binding position adjustment method used for 2-sided printing.

Line Width Adjustment

To adjust the line width so as to make thin lines and small letters easier to see,
select the line breadth.

Gray Background Text
Correction

To adjust the line width in gray scale background so as to make thin lines and
small letters easier to see, select "ON".
Selecting "OFF" applies the "Line Width Adjustment" setting in gray scale
background.

Item

Description

Item

Description

Symbol Set

Select the symbol set.

Typeface

Specify whether to select a font from internal fonts (resident fonts) or from
downloaded fonts (download fonts) when the font being used is not specified.

Font Size

Specify either the font pitch or the font point size, depending on the selected
typeface.

Line/Page

Enter the number of lines per page.

CR/LF Mapping

Select the CR/LF substitution method when printing text data.

This manual is related to the following products: