Konica Minolta BIZHUB C652DS - Manual (Page 291)

bizhub C652/C652DS/C552/C552DS/C452 2-273
2.63 Settings under "Fax Settings" 2
2.63.8 Registering the Sender Name and Fax ID
You can register the sender name and fax ID of this machine.
Reference
- The sender name can be registered for each line when registering sender information for each line (two
optional fax kit FK-502 are installed while "Sender Setting for each Line" is set to "ON" in "TX/RX
Settings").
Header Information
In the administrator mode of PageScope Web Connection, select "Fax Settings" ö "Header Information".
Line 2 Setting Specify the communication method for Line 2 (an extension line).
You can specify TX Only, RX Only, or TX and RX only for an extension line.
Sender Fax No. Enter the sender Fax number. Usually enter the fax number of the fax machine.
The registered fax number is printed as the sender information on the fax re-
ceived by the recipient.
Item Description
Item Description
Sender Fax No. Enter the fax ID (up to 20 numerals, including #, *, +, and space).
Normally enter the fax number of this machine.
This setting is not required when sending an Internet fax.
For 1 lines:
Default
For 2 lines:
Line 1 Default Specify the default sender name to be used for line 1.
If the sender name is not specified when sending a fax, the default specified
in this item is printed on an original.