Konica Minolta BIZHUB C652DS - Manual (Page 281)

bizhub C652/C652DS/C552/C552DS/C452 2-263
2.63 Settings under "Fax Settings" 2
Memory RX Setting
In the administrator mode of PageScope Web Connection, select "Fax Settings" ö "Function Setting" ö
"Memory RX Setting".
Reference
- The Memory RX function stores received documents in the Memory RX User Box, and prints them when
required.
Confirm Address (TX) Specify whether to require re-entry of a fax destination for confirmation pur-
poses when the user specifies the destination by directly entering the fax
number.
By having the user enter it twice, you can prevent the destination from being
incorrectly entered.
Confirm Address (Reg-
ister) Specify whether to require re-entry of a fax destination for confirmation pur-
poses when adding the destination with the address book.
By having the user enter it twice, you can prevent the destination from being
incorrectly entered and registered.
Item Description
Item Description
Fax Line 1 Select whether to perform the forced memory reception via fax line 1.
This item is available when two optional fax kit FK-502 are installed while "RX
Setting for each Line" is set to "ON" in "TX/RX Settings".
Fax Line 2 Select whether to perform the forced memory reception via fax line 2.
This item is available when two optional fax kit FK-502 are installed while "RX
Setting for each Line" is set to "ON" in "TX/RX Settings".
Password is changed. Select this check box to change the password.
Memory RX User Box
Password Enter the password for the Memory RX User Box (up to eight characters).