1 tcp/ip settings, 2 web service common settings, Tcp/ip settings -113 – Konica Minolta BIZHUB C652DS User Manual
Page 131: Web service common settings -113, P. 2-113
bizhub C652/C652DS/C552/C552DS/C452
2-113
2.37
Using Web services to establish an SSL communication from this machine to Vista/Server 2008
2
2.37
Using Web services to establish an SSL communication from this
machine to Vista/Server 2008
Configure settings to use the encrypted SSL communication from this machine to a computer running on the
Windows Vista/Server 2008 in a Web services environment. Security of Web services communication can be
enhanced using the SSL protocol encryption.
When you configure the SSL communication settings, check the following points.
-
To use the encrypted SSL communication between this machine and the computer, you must set the
bidirectional SSL communication between them. Configure both the following settings and the settings
for "Using Web services to secure communication from Vista/Server 2008 to this machine via SSL".
-
Create a certificate at the computer first, and then associate the TCP/IP communication port (the
default port number is 5358).
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
2.37.1
TCP/IP Settings
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-6.
2.37.2
Web Service Common Settings
In the administrator mode of PageScope Web Connection, select "Network" ö "Web Service Settings" ö
"Web Service Common Settings".
Finish
Item
Description
Prior check
Friendly Name
Enter a Friendly Name (up to 62 characters).
SSL Settings
Select "ON".
Publication Service
If you use this machine in an environment where NetBIOS
is disabled or only the IPv6 protocol communication is
used by the Windows Vista or Server 2008 system, set this
item to "Enable".
The Publication Service function can detect up to 512
destinations, including those detected with the NetBIOS
service.
Certificate Verifica-
tion Level Settings
Specify how to validate a certificate.
Validity Period
Select whether to check that the target certificate is within
the validity period.
Key Usage
Select whether to check that the certificate is used ac-
cording to the purpose approved by the issuer.
Chain
Select whether to check that the certificate chain (certifi-
cation path) is correct.
The chain is validated by referencing the external certifi-
cates managed on this machine. For details, refer to
page 2-210.
Expiration Date
Confirmation
Select whether to check that the target certificate is within
the validity period.
The OCSP service and CRL (Certificate Revocation List)
are checked in this order when the expiration date of the
certificate is checked.