Konica Minolta BIZHUB C652DS - Manual (Page 140)

bizhub C652/C652DS/C552/C552DS/C452 2-122
2.41 Reporting the status of this machine (TRAP) 2
2.41 Reporting the status of this machine (TRAP)
Configure settings to report the status of this machine to the administrator using the SNMP TRAP functions.
If an alarm has occurred on this machine, it can be reported to the specified IP address or IPX address by
the SNMP TRAP.
To use the SNMP TRAP functions, you must set the SNMP in advance. For details, refer to page 2-116.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
2.41.1 TCP/IP Settings
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-6.
2.41.2 NetWare Settings
In the administrator mode of PageScope Web Connection, select "Network" ö "NetWare Setting" ö
"NetWare Setting".
(1) Notification to IP address
(2) Notification to IPX ad-
dress
(1) (2)
TCP/IP Settings NetWare Settings
TRAP Settings
Status Notification Setting
Finish