Konica Minolta BIZHUB C652DS - Manual (Page 251)

bizhub C652/C652DS/C552/C552DS/C452 2-233
2.62 Settings under "Store Address" 2
Registering a new "E-mail" destination
Registering a new "FTP destination"
Item Description
No Specify the registration number of the destination.
If you select "Input directly", enter the registration number.
Name Enter the destination name (up to 24 characters).
Index Select the index character used when searching for the destination.
It is convenient to select the "Main" check box for a frequently used destina-
tion.
E-mail Enter the E-mail address of the destination (up to 320 characters).
Registration of Certifi-
cation Information Select this check box to register certificate information.
Click [Browse] to specify the certificate to be registered. Only the DER (Distin-
guished Encoding Rules) formatted file is supported for registration of certifi-
cate information.
To delete the registered certificate information, select "Deletion of Certification
Information".
You cannot register a certificate if the E-mail address of the destination does
not match that of the certificate. Before registering a certificate, check that
those E-mail addresses are the same.
Limiting Access to Des-
tinations Click [Display] to display the current settings for limiting access to destina-
tions.
Specify the access allowed level or reference allowed group required to ac-
cess this destination.
Item Description
No Specify the registration number of the destination.
If you select "Input directly", enter the registration number.
Name Enter the destination name (up to 24 characters).
Index Select the index character used when searching for the destination.
It is convenient to select the "Main" check box for a frequently used destina-
tion.
Host Address Enter the IP address of the destination FTP server.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can enter the host name
instead.
If "IPv6" is set to "ON", you can also specify the IPv6 address.
File Path Specify the destination directory (up to 127 bytes).
User ID Enter the user ID to log in to the destination FTP server (up to 63 bytes).
Password is changed Select this check box to change the password.
This item is displayed when editing the registered information.
Password Enter the password to log in to the destination FTP server (up to 63 bytes, ex-
cluding space and ").
anonymous Select whether to allow anonymous users to access the FTP server.
PASV Mode Select whether to communicate in PASV mode.
Proxy Select whether to use a proxy server.
Port No. Enter the port number.
Limiting Access to Des-
tinations Click [Display] to display the current settings for limiting access to destina-
tions.
Specify the access allowed level or reference allowed group required to ac-
cess this destination.